A home's energy efficiency depends on several factors, including its windows, heating, cooling, and appliances. Product labels and specifications describe particular characteristics of materials or products; a single figure cannot predict the energy costs or comfort of a specific home.

This guide explains window and equipment indicators, as well as energy terms and units. It includes an example of how to read data for residential electric cooking products. It focuses on the United States and is intended to help interpret product information, not to assess a particular home or recommend changes to its systems.

Windows: what ratings describe

The NFRC residential certification program evaluates window parameters such as U-factor, solar heat gain coefficient (SHGC), and visible transmittance (VT). It also evaluates air leakage and condensation resistance. The available information does not specify which of these ratings appear on every label.

  • U-factor: Indicates heat transfer through the window; a lower value means less heat transfer.
  • SHGC: Measures solar heat gain through the window, or how well it blocks heat from sunlight. A lower value means less solar heat gain.
  • VT: Describes visible light transmittance. The available documentation confirms that it is evaluated, but does not provide enough detail here to interpret a specific figure.
  • Air leakage: A rating related to air that may pass through the product being evaluated. It does not measure air infiltration throughout the home.

U-factor and SHGC describe different properties: one concerns heat transfer through the window, and the other concerns solar heat gain. Climate and orientation can be relevant when selecting windows, but these figures alone cannot support a recommendation for a product for a particular home or location.

NFRC uses simulations to determine several ratings, including U-factor, SHGC, and VT. Its process also includes physical testing to validate simulations; air-leakage measurement requires physical testing. Ratings describe the product evaluated and do not, by themselves, determine whether a window is suitable for a particular use or home.

A technical guide from the U.S. Department of Energy and the National Renewable Energy Laboratory on window selection, published in 2012, also describes U-factor, SHGC, visible transmittance, and air leakage. It is a historical technical reference and does not confirm current ENERGY STAR criteria.

Heating and cooling: heat pumps

A heat pump transfers heat to heat or cool a home. Types described by the U.S. Department of Energy include air-source, geothermal, ductless mini-split, and absorption heat pumps.

In moderate climates, heat pumps can be an energy-efficient alternative to furnaces and air conditioners. This does not mean that every unit is suitable for every home or climate. The available data do not make it possible to estimate a model's performance or savings in a particular home. The Department of Energy notes that geothermal heat pumps have a high installation cost and may pay for themselves over time through lower heating and cooling costs. No specific payback period or guarantee of payback for every home is provided here.

When comparing equipment, check what each indicator measures and the conditions it refers to:

  • COP (coefficient of performance): The ratio of the change in heat at the output reservoir to the work supplied.
  • SEER2: The ratio of the total heat removed from the conditioned space during the annual cooling season to the total electrical energy consumed during that period. The available definition expresses these quantities in Btu and watt-hours, respectively. A higher SEER2 indicates greater energy efficiency within this metric.
  • HSPF2: The ratio of the total space heating required in region IV during the heating season to the total electrical energy consumed by the heat-pump system during that same season. The cited region IV comprises Iowa, Minnesota, Missouri, North Dakota, and South Dakota; the required heating and electricity consumed are expressed in Btu and watt-hours, respectively.
  • AFUE: A rating indicating the efficiency of gas heating equipment. A higher value indicates more efficient equipment.

These indicators have different definitions and evaluation conditions, so their figures are not interchangeable and should not be compared directly across different metrics. The direction of a value can have meaning within its own metric: for example, a higher SEER2 indicates greater energy efficiency. Review the equipment specification and evaluation conditions before drawing conclusions.

Insulation, R-value, and air sealing: what can be compared

R-value is used to rate the thermal resistance of insulation. For comparing insulation products, the Department of Energy's technical documentation recommends comparing equivalent R-values; the choice also depends on factors such as the amount of insulation needed, available space, and installation location. R-value should not be confused with a window's U-factor: they are different indicators, and their figures are not directly comparable.

Insulation and air sealing are not the same thing, either. Insulation limits heat transfer in the space it occupies, but it does not necessarily stop air from passing through cracks or joints between parts of a home. A window's air-leakage rating characterizes the product evaluated; it does not, by itself, identify air infiltration throughout the home or the source of a draft.

This guide does not assess the insulation or air sealing of a particular home and does not provide instructions for construction work.

Ventilation: limited scope

A 2008 Department of Energy fact sheet includes moisture control and ventilation topics in the context of insulation and home improvements. However, the information available for this guide is not sufficient to explain residential ventilation system types, airflow rates, or design criteria in detail. It is therefore not possible here to determine whether a home's ventilation is sufficient or to recommend changes to its equipment.

A window's air-leakage rating is not an assessment of ventilation in a room or throughout a home. Nor should it be interpreted as a measurement of the building's air exchange.

Appliances and energy use

Product specifications may list annual energy use and other characteristics. Check the period and conditions associated with each figure. For residential electric cooking products, ENERGY STAR information describes reported annual energy use as an estimate under typical conditions; actual use may vary with usage patterns.

Units: kWh, Btu, and watt-hours

A kWh (kilowatt-hour) is a unit of energy. In data for residential electric cooking products, kWh/year represents an estimated annual energy use under typical conditions. It is not instantaneous power and does not guarantee any household's annual energy use.

The SEER2 and HSPF2 definitions relate amounts of heat—expressed in Btu—to electrical energy consumed—expressed in watt-hours (Wh)—over seasonal evaluation periods. By contrast, kWh/year expresses an amount of energy consumed over a year. Therefore, a SEER2 or HSPF2 value is not interchangeable with annual energy use in kWh: the former is a seasonal performance ratio, while the latter is an annual quantity of energy. Estimating a home's energy use from those indicators would require additional information about the equipment and how it is used.

Example: reading cooktop data

ENERGY STAR criteria for residential electric cooking products were introduced on September 25, 2023. The criteria page lists the following levels:

Product or measure Stated criterion
Residential electric cooking products Integrated annual energy consumption (IAEC) ≤ 195 kWh/year
Electric ranges: conventional oven component Combined annual low-power-mode energy consumption ≤ 7 kWh/year

These are different requirements: the second applies to the oven component of an electric range. The page consulted presents these levels as current criteria, but requirements may change; check the applicable official information before relying on them for a purchase decision.

Separately, product information says that the reported annual energy use for a cooktop is based on 418 cooking events per year, averaging 31 minutes per event. That basis describes how the reported annual figure is calculated; it should not be confused with the certification criteria limits. Actual energy use varies with usage patterns, including how often the product is used.

When reading a specification, distinguish the certification-criteria limit, the reported annual energy use, and the reference usage conditions. None of these figures predicts a home's energy use exactly. Calculating a cost would also require actual energy use and the applicable electricity rate.

ENERGY STAR: what the label indicates

ENERGY STAR is a voluntary energy-efficiency labeling program in the United States. Program information states that, in 2026, the U.S. Department of Energy (DOE) and the Environmental Protection Agency (EPA) agreed to consolidate the program's leadership and administration at DOE, and that the 2026 transition plan is underway. This describes an agreement and an ongoing process; it does not confirm that the consolidation has been completed.

Products that earn the label must meet performance requirements and be independently certified. Criteria vary by product category. Certification for a new home is a separate process: new homes and apartments that earn ENERGY STAR must undergo third-party inspections and testing to verify the applicable requirements.

A tax-credit definitions page, with information updated on February 16, 2023, warns that not all certified products qualify for a tax credit. That information does not confirm the current requirements for any particular credit or incentive. Before buying on that assumption or applying for a benefit, check the current official rules that apply to the product and program.

Glossary for comparing specifications

Term What it describes How to interpret it cautiously
R-value Thermal resistance of insulation. Compare insulation products with equivalent R-values. Do not compare this indicator directly with a window's U-factor.
U-factor Heat transfer through a window. A lower value means less heat transfer. Check which product and evaluation the figure describes.
SHGC Solar heat gain through the window, or how well the window blocks heat from sunlight. A lower value means less solar heat gain.
VT Visible transmittance, a parameter evaluated in NFRC residential certification. The information available here does not explain how to interpret a specific figure.
Air leakage A rating for air that may pass through the product being evaluated. It does not measure air infiltration throughout the home or, by itself, determine room ventilation.
COP Ratio of the change in heat at the output reservoir to the work supplied. Check the definition and evaluation conditions before interpreting the figure.
SEER2 Ratio of heat removed during the annual cooling season to electrical energy consumed during that period. A higher SEER2 indicates greater energy efficiency within this metric. It is a seasonal performance ratio, not annual energy use in kWh.
HSPF2 Ratio of the space heating required in region IV during the heating season to the electrical energy consumed by the heat pump during that period. The cited definition covers Iowa, Minnesota, Missouri, North Dakota, and South Dakota. It relates heat in Btu to electrical energy in watt-hours; it is not annual energy use in kWh.
AFUE Rating of the efficiency of gas heating equipment. A higher value indicates more efficient equipment. Consult the specification and the indicator's definition.
kWh/year Annual energy use listed or reported for a product. For residential electric cooking products, it is described as an estimate under typical conditions; actual energy use may vary with usage.
Btu and Wh Units used in the SEER2 and HSPF2 definitions for heat and electrical energy consumed during their evaluation periods. Do not confuse a seasonal ratio such as SEER2 or HSPF2 with an annual quantity of energy such as kWh/year. Check which period and quantity each figure describes.

A practical way to read a specification

  1. Identify the product and the figure. Check which product the specification describes and what characteristic it measures.
  2. Note the period and conditions. If annual energy use is listed, look for its evaluation basis and distinguish that figure from a certification-criteria limit.
  3. Keep indicators separate. U-factor and SHGC describe different window characteristics. COP, SEER2, HSPF2, and AFUE also have their own definitions; a higher SEER2 indicates greater efficiency within that metric.
  4. Check the units and type of figure. kWh/year expresses energy consumed over a year; for electric cooking product data, the figure is an estimate under typical conditions. SEER2 and HSPF2 are seasonal performance ratios between heat and electricity consumed, not annual energy-use quantities. Do not treat these indicators as interchangeable.
  5. Do not extrapolate to the whole home. A specification describes the product and stated evaluation conditions, not a home's overall performance or whether its ventilation is sufficient.
  6. Check the requirements that matter to you. Criteria and benefits vary by category and program. Consult the applicable current official information before basing a purchase or application on them.

Territory and limitations

The terms and programs in this guide are presented in the context of the United States. Labels and standards may vary across countries and jurisdictions. The guide covers criteria for residential electric cooking products and references on windows, heat pumps, and equipment indicators, but it does not confirm the current status of all criteria in other categories or programs. Nor can it calculate the savings or comfort of a particular home, assess its insulation or air sealing, or determine whether its ventilation is adequate.

At a glance

Nexo request

  • 1109
  • nexo:broken-link:1109:priority:v1
  • Proyecto: House Angle
  • en
  • House Angle project. Source and proposed content language: English. Topic: a practical guide and glossary to residential energy-efficiency technologies and standards. For homeowners and renters using the library, explain insulation and R-value, air infiltration and sealing, windows, heating and heat pumps, ventilation, appliance energy use, energy units, and labels or standards applicable in the U.S., such as ENERGY STAR; include examples of how to read product data and links to official sources. The goal is to help readers interpret technologies and standards, like the missing resource. Distinguish the independent editorial guide from the Berkeley resource and review attribution if a replacement is proposed.
  • https://libwww.freelibrary.org/faq/faqsubcat.cfm?FAQCategory=94
  • http://hes.lbl.gov/hes/librarian.html
  • 9c26db7647c60534b9cb427177200d1c33fe5bbe19fb8d223de7cafd74624744

Priority authorization

  • explicit_owner_instruction
  • 1109
  • highest_native
  • 1
  • 1
  • 1

Required locales

  • es
  • en
  • fr
  • it
  • de
  • pt

Research required

1

Sources and references

Heat Pumps | Department of Energy ↗19/11/2026

Residential Electric Cooking Products Key Product Criteria | ENERGY STAR ↗19/11/2026

ENERGY STAR Certification | ENERGY STAR ↗19/11/2026

Energy Efficiency | ENERGY STAR ↗19/11/2026

How ENERGY STAR Works | ENERGY STAR ↗19/11/2026

Tax Credit Definitions | ENERGY STAR ↗19/11/2026

Proyecto: House Angle ↗19/11/2026

Fenestration | Building Science Education ↗19/11/2026

Proyecto: House Angle ↗19/11/2026

The ENERGY STAR Brand | ENERGY STAR ↗19/11/2026

Residential Product Certification - National Fenestration Rating Council ↗20/11/2026

Appendix E: NFRC 200 Section 5.6 ↗20/11/2026

Proyecto: House Angle ↗20/11/2026

Proyecto: House Angle ↗20/11/2026

Photograph · Photo by Francesca Cinel on Pexels · Pexels License · Sources and references · Centred crop to 4:3, resizing and conversion to JPEG for House Angle.