Materials matter, but so does their function

Timber, stone and plant fibres can form structural elements, cladding or insulation components. Their architectural interest does not depend on a “natural” appearance, and the presence of any one of these materials does not, by itself, prove that a building has low emissions. Assessing a home’s impact would require data about the building and its materials that is not available for the examples described here.

One useful way to read these projects is to ask what each component does and how it fits into the whole: what it supports, how it is assembled and where it sits in the building envelope. The examples show design possibilities, not a comprehensive comparison of the environmental impact of different homes.

Stone: structural material and components

Stone extracted from quarries can be split, cut or carved into building elements such as blocks and columns, and can also serve a structural function. It is found in the Earth’s crust and requires little processing after extraction. These characteristics describe the material; they do not assess the total impact of a particular building or mean that stone is available without limit.

Timber: from pieces to systems

Engineered timber is made by joining and processing pieces of wood to form composite components. Cross-laminated timber, known as CLT, is one system used in multi-storey buildings.

Murray Grove in London is a nine-storey residential tower built from prefabricated solid-timber panels, from the load-bearing walls and floor slabs to the stair and lift cores. The project shows how structural components can be arranged in a multi-storey urban building.

Dalston Works, also in London, is a ten-storey development with 121 units. On completion in 2017, it was described as the world’s largest CLT building. Timber was used for the external, party and core walls, as well as the floors and stairs. Both projects illustrate uses of engineered timber; on their own, they do not establish the environmental balance of every timber building.

Plant fibres: components and building envelopes

In construction, straw can refer to the stalks left after the grain has been removed from plants such as wheat, rye and oats. It can be used in walls, bricks, insulation and other components, and combined with materials such as clay or bio-waste resins. It is also considered for roofing, but this does not establish that all straw-based solutions are equivalent or suitable for every project.

Flat House in Cambridgeshire offers another example of plant-based materials. The Material Cultures project uses a prefabricated structural panel made from timber and hempcrete, infilled with hemp grown on the farm; hemp-fibre cladding is also among its key materials. The design was conceived as a prototype for prefabricated hemp construction that could be applied to larger-scale projects. It is a specific case, not a guarantee of performance in other buildings.

Thinking about materials together

Stone, timber and plant fibres are not interchangeable substitutes. Stone can form part of a structure; timber can be organised into panels and other load-bearing components; and plant fibres can be incorporated into walls, insulation or cladding. The choice and combination depend on the functions each element needs to perform in the design.

The projects discussed here help show how materials with different histories and properties can be integrated into contemporary architecture. But knowing the main material is not enough to compare the emissions of two buildings: data on their construction systems and the impact of each home as a whole would be needed. These cases are therefore examples of design and construction, not an environmental ranking.

At a glance

Scope

Editorial reading; this is not a site visit or a technical assessment.

Sources and references

How to Build a Low-Carbon Home ↗06/11/2026

Search ↗06/11/2026

How to build a low-carbon home - by Lloyd Alter ↗12/11/2026

Turning straw into gold: How to cut carbon in residential architecture | The American Institute of Architects ↗12/11/2026

How to Build a Low-Carbon Home | Future Observatory ↗12/11/2026

How to Build a Low-Carbon Home | Material-focused showcase ↗12/11/2026

Material Cultures — Flat House, 2020 ↗12/11/2026

Murray Grove | Waugh Thistleton Architects ↗12/11/2026

Dalston Works | Waugh Thistleton Architects ↗12/11/2026

Photograph · Photo by cottonbro studio on Pexels · Pexels License · Sources and references · Centred crop to 4:3, resizing and conversion to JPEG for House Angle.