In 1940, Charles Eames and Eero Saarinen submitted a furniture proposal to the Museum of Modern Art’s Organic Design in Home Furnishings competition that treated storage as a system rather than a collection of separate pieces. The entry panels preserved by MoMA document two aspects of the project: the cabinet types and their possible configurations. The Eames Foundation notes that the system combined three benches with nine kinds of modules.
Nine types, distinct functions
The cabinets differed in their intended uses and in how their interiors were organized. The list includes a record-player and radio unit, a bar unit, a corner unit, open shelving, and variations with drawers, shelves, or doors. There was also a double-width unit intended for clothing or tableware.
| Module type | Described organization or function |
|---|---|
| Record player and radio | Unit for record-playing equipment and a radio |
| Bar | Bar unit |
| Corner | Corner unit |
| Open shelving | Open storage space |
| Open shelving with drawer | One open shelf and one drawer |
| Shelf with drawers | One shelf and two drawers |
| Door | Unit with a door |
| Drawer and shelf | One drawer and one shelf |
| Double width | Unit intended for clothing or tableware |
The variety did not depend only on assigning a function to each piece of furniture: the modules could be combined with one another and with the benches. On the entry panel, Eames and Saarinen put the number of possible combinations at 62,199,765. That figure conveys the project’s ambition for flexibility; by itself, it does not indicate how many configurations were actually made or used.
The finish matters too
The proposal considered how the pieces would relate to domestic space. Each cabinet was finished on all four sides. This meant that a module could be displayed with different sides visible, rather than depending on a single finished front. The underside of each cabinet also had rubber bumpers to prevent the tops of the benches from being scratched.
These decisions may seem minor, but they reveal an integrated approach: the furniture was designed to function as combinable units while also protecting the surfaces where pieces met. Modularity was not limited to adding storage compartments; it also included how each piece could be positioned in relation to the others.
An idea of domestic order
The project makes visible a way of thinking about furniture through relationships: a series of units with identifiable functions, brought together in a system open to different arrangements. Rather than defining one piece of furniture for one specific place, it proposed organizing varied needs—from storing records to keeping tableware or clothing—through compatible modules.
MoMA preserves two 1940 entry panels related to the proposal, one titled Cabinets and the other Cabinet Units. Both are catalogued as pencil and airbrush drawings on board and are recorded as gifts of the designers. The available documentation describes the panels and the system, but is not enough to establish how many combinations were realized or how the units were distributed in homes.
At a glance
Scope
Editorial reading; this does not constitute a visit or a technical assessment.
